The Breakout Board enables all components to be properly connected without additional cables or soldering work. The components are simply connected to one another via plug-in connections. There is also the option of connecting two temperature and humidity sensors via a plug connection.

Specification:

Size: 70 x 60 x 2 mm
1x Socket Feather & Wing Size (https://learn.adafruit.com/adafruit-feather/feather-specification)
1x Socket for HX711
1x 4-pin terminal strip for load cell
2x 3-pin connector strip for temperature and humidity sensor GND|VCC|D3 and GND|VCC|D4 (e.g. DHT22)
1x 2-pin connector GND|D7 (e.g.: LED)
1x 2-pin header for on/off switch
1x 2-pin header for solar panel
1x battery connector